Big Top Circus | Boys Vintage Wall Mural

Big Top Circus - Boys Vintage Wall Mural

Welcome to the most magical show on earth with this wonderfully charming vintage circus pattern mural. A spectacular cast of classic circus characters and attractions fills a warm parchment cream background in a rich, nostalgic watercolor style - towering red and white striped big top circus tents with navy blue entrances and red pennant flags fly proudly throughout the composition, their golden 'Circus' banner signs glowing warmly. A majestic grey elephant in a red sequined headpiece balances with perfect poise atop a large red and white striped circus ball, while a proud golden lion in a red ruffled collar sits regally in the foreground. A beautifully ornate carousel merry-go-round with golden poles, white galloping horses, and a striped canopy spins gracefully at the centre of the scene. Colourful triangular bunting garlands in red, golden yellow, teal blue, and sage green are strung between the tents, and a vintage wooden directional signpost points the way to 'Fun Fair'. Golden admission tickets stamped 'Ticket', a large red and white striped bouncing ball, round coloured balloons, and a scatter of five-pointed stars in red, golden yellow, teal, and dusty sage fill every corner. Illustrated in a warm, richly detailed vintage watercolor style with crimson red, golden yellow, dusty teal blue, warm parchment cream, and earthy brown - nostalgic, magical, and endlessly festive.

Custom-Made to Your Size

This mural is made to order. Provide your wall dimensions at checkout and we'll print it perfectly fitted to your wall.

• ✔ High-resolution, fade-resistant print
• ✔ Premium non-woven material
• ✔ Custom-fitted to your wall dimensions

Perfect for boys bedrooms, nurseries, and playrooms.

Wall Preparation
Ensure the wall is smooth, clean, and dry before you begin. Remove any nails, screws, or dust, and sand down rough surfaces as needed.

Mixing the Paste
Follow the instructions on your paste package and mix until you reach a smooth, lump-free consistency.

Checking the Panels
Lay out all panels on the floor before hanging. Verify that the pattern aligns correctly and inspect for any defects.

Applying the Paste
Using a roller or brush, apply a thin, even layer of paste directly onto the wall. Start from the top and work downward, covering a section slightly wider than each panel.

Hanging the Panels
Begin at the left side of the wall and work right. Align the first panel at the top and smooth it downward from the center outward to release air bubbles. Continue with each panel, aligning edges precisely without overlapping.

Trimming
Once all panels are in place, use a sharp knife to trim any excess material at the top, bottom, and sides.

Drying and Finishing
Allow the mural to dry for 24 hours. Do not touch or press on it during this time. Once dry, inspect for any lifting edges or air bubbles and smooth them out as needed.

1. Measure Width and Height
   Use a measuring tape to measure the full width and height of the wall. Take measurements at multiple points to account for any irregularities. Add an extra 5 cm (2 inches) to both dimensions to allow for trimming and adjustments during installation.
2. Sloped Walls
   For walls with sloped ceilings or floors, measure at the highest and widest points. Always capture the maximum dimensions to ensure full coverage.
3. Walls with Obstacles
   Measure the entire wall as if doors, windows, and built-in furniture do not exist. You will cut around these during installation, so it is important to have enough material to work with. Add the standard extra margin at all edges.
4. Multiple Walls
   Measure each wall separately, then combine the widths. Add 5 cm per wall to allow for proper alignment and trimming at each seam.
5. Irregular Shapes
   Break the wall into smaller rectangular sections and measure each one individually. Add the extra margin to each section before combining totals.
6. Confirm Your Measurements
   Double-check all measurements before placing your order. Consider sketching the wall with its dimensions to help visualize the layout and catch any errors.