Little Monsters | Boys Cute Monster Wall Mural

Little Monsters - Boys Cute Monster Wall Mural

Fill your little one's room with the most lovable crew of friendly monsters imaginable. This wonderfully cheerful all-over pattern mural features a delightful cast of fluffy, round monsters in a soft warm cream background - a big teal monster with golden horns and a wide toothy grin, a cheerful one-eyed green monster with stumpy arms, a cuddly golden yellow monster waving happily, a round grey monster with big friendly eyes, a small teal horned monster with a wide smile, and a fuzzy grey yeti-style monster peeking from behind a mountain peak. Scattered throughout the composition are geometric triangle mountains in teal, sage, and golden yellow with zigzag snowy caps, fluffy watercolor clouds in teal and dove grey, a delicate silver crescent moon, and a generous scatter of five-pointed stars in golden yellow, teal, and soft grey - tiny and large, filling every corner of the design with warmth and magic. Illustrated in a soft, textured watercolor style with mint teal, golden yellow, sage green, warm grey, and creamy ivory - gentle, joyful, and endlessly charming.

Custom-Made to Your Size

This mural is made to order. Provide your wall dimensions at checkout and we'll print it perfectly fitted to your wall.

• ✔ High-resolution, fade-resistant print
• ✔ Premium non-woven material
• ✔ Custom-fitted to your wall dimensions

Perfect for boys bedrooms, nurseries, and playrooms.

Wall Preparation
Ensure the wall is smooth, clean, and dry before you begin. Remove any nails, screws, or dust, and sand down rough surfaces as needed.

Mixing the Paste
Follow the instructions on your paste package and mix until you reach a smooth, lump-free consistency.

Checking the Panels
Lay out all panels on the floor before hanging. Verify that the pattern aligns correctly and inspect for any defects.

Applying the Paste
Using a roller or brush, apply a thin, even layer of paste directly onto the wall. Start from the top and work downward, covering a section slightly wider than each panel.

Hanging the Panels
Begin at the left side of the wall and work right. Align the first panel at the top and smooth it downward from the center outward to release air bubbles. Continue with each panel, aligning edges precisely without overlapping.

Trimming
Once all panels are in place, use a sharp knife to trim any excess material at the top, bottom, and sides.

Drying and Finishing
Allow the mural to dry for 24 hours. Do not touch or press on it during this time. Once dry, inspect for any lifting edges or air bubbles and smooth them out as needed.

1. Measure Width and Height
   Use a measuring tape to measure the full width and height of the wall. Take measurements at multiple points to account for any irregularities. Add an extra 5 cm (2 inches) to both dimensions to allow for trimming and adjustments during installation.
2. Sloped Walls
   For walls with sloped ceilings or floors, measure at the highest and widest points. Always capture the maximum dimensions to ensure full coverage.
3. Walls with Obstacles
   Measure the entire wall as if doors, windows, and built-in furniture do not exist. You will cut around these during installation, so it is important to have enough material to work with. Add the standard extra margin at all edges.
4. Multiple Walls
   Measure each wall separately, then combine the widths. Add 5 cm per wall to allow for proper alignment and trimming at each seam.
5. Irregular Shapes
   Break the wall into smaller rectangular sections and measure each one individually. Add the extra margin to each section before combining totals.
6. Confirm Your Measurements
   Double-check all measurements before placing your order. Consider sketching the wall with its dimensions to help visualize the layout and catch any errors.