Swan Castle Dream | Girls Floral Wall Mural

Swan Castle Dream - Girls Floral Wall Mural

Drift into the most breathtakingly ethereal fairy tale dreamworld with this luminously romantic castle and swan mural. A magnificent pink and lavender castle with soaring purple-tipped spires, arched golden windows, and a grand arched doorway rises majestically from a sea of soft blush pink and lavender clouds at the heart of the composition, glowing warmly against a dreamy blush and lilac watercolor sky scattered with golden stars. A golden crescent moon hangs serenely to the upper left, casting a gentle magical glow across the entire scene. On the cloud below the castle, two graceful white swans with golden crowns and delicate pink floral necklaces glide peacefully together across a shimmering lavender mist lake, their necks curved elegantly toward one another. To the right of the castle, an endearingly sweet white bunny with soft round ears and a tiny golden wand sits upright on the pink clouds, gazing up at the castle in wonder. The entire scene is magnificently framed on all four sides by an extraordinary abundance of enormous blush pink garden roses, soft dusty lavender peonies, warm peach dahlias, creamy ivory blooms, and trailing sage green leaves. Delicate blush pink and golden butterflies drift through the warm luminous air throughout the composition. Painted in an exquisitely luminous dreamy watercolor style with the softest blush pink, dusty lavender, warm peach, champagne ivory, sage green, and pale gold — utterly magical, romantic, and timelessly beautiful.

Custom-Made to Your Size

This mural is made to order. Provide your wall dimensions at checkout and we'll print it perfectly fitted to your wall.

• ✔ High-resolution, fade-resistant print
• ✔ Premium non-woven material
• ✔ Custom-fitted to your wall dimensions

Perfect for girls bedrooms, nurseries, and playrooms.

Ensure the wall is smooth, clean, and dry.
Remove any nails, screws, or dust. Sand down any rough surfaces.
Mixing Paste:

Follow the instructions on the paste package.
Mix the paste until it reaches a smooth consistency.
Installation:
Checking Panels:

Lay out all wallpaper panels on the floor.
Ensure the pattern matches and check for defects.
Applying Paste:

Use a roller or brush to apply a thin, even layer of paste directly onto the wall.
Start from the top and work your way down, covering a section slightly wider than the wallpaper panel.
Hanging Panels:

Begin from the left side of the wall and move right.
Align the first panel at the top and smooth it down from the center outwards to remove air bubbles.
Continue with the next panels, ensuring they align edge to edge without overlapping.
Trimming Excess:

Once all panels are hung, use a sharp knife to trim any excess wallpaper at the top, bottom, and sides.
Final Steps:
Drying Time:

Allow the wallpaper to dry for 24 hours.
Avoid touching or pressing on the wallpaper during this time.
Finishing Touches:

Inspect for any air bubbles or edges lifting and smooth them out if necessary.

1. Measure the Width and Height:
   
   Use a measuring tape to measure the full width and height of the wall. Measure at multiple points along the wall to account for any irregularities.
   Add an extra 5 cm (2 inches) to both the width and height measurements. This extra margin will allow for trimming and adjustments during installation
   
2. Sloped Walls:
   
   For walls with sloped ceilings or floors, measure the highest and widest points of the wall.
   It's important to capture the maximum dimensions to ensure the mural will cover the entire wall, even at its tallest and widest points.
   
3. Walls with Obstacles:
   
   Measure the entire wall as if there were no obstacles like doors, windows, or built-in furniture.
   You will cut around these obstacles during installation, so it's crucial to have enough mural material to work with.
   For windows and doors, measure to the edges and add the extra margin as previously mentioned.
   
4. Multiple Walls:
   
   When installing a mural on multiple adjoining walls, measure each wall separately.
   Combine the widths of all walls and add 5 cm for each wall to ensure enough material for proper alignment and trimming.
   
5. Irregular Shapes:
   
   For walls with irregular shapes, break down the wall into smaller, more manageable sections and measure each section separately.
   Combine the measurements, ensuring to add the extra margin for trimming.
   
6. Confirm Measurements:
   
   Double-check all measurements to ensure accuracy.
   Consider drawing a rough sketch of the wall with the measurements to help visualize the layout and to double-check the number