Unicorn Cloud Castle | Girls Dreamy Wall Mural

Unicorn Cloud Castle - Girls Dreamy Wall Mural

Float away into the most breathtakingly ethereal fairy tale sky with this luminously dreamy unicorn and castle mural. A magnificent pale pink and lavender castle with soaring purple-tipped spires, gold-trimmed arched windows, and a grand stone staircase rises majestically atop a lush green hilltop island nestled among billowing clouds of the softest blush pink, powder blue, and dusty lavender against a warm champagne and blush watercolor sky. A golden crescent moon glows warmly to the upper center, surrounded by scattered golden stars and tiny golden sparkles drifting through the luminous air. Two delicate butterflies — one soft lavender and one blush pink — flutter gracefully through the mid-sky. On the left, a beautiful young unicorn with a pink spiral horn, a flowing blush and lavender mane, and soft white coat stands serenely among wildflowers and tiny blooms growing from the cloud-covered ground, gazing gently ahead. On the right, an endearingly sweet spotted fawn with a small floral crown of pale pink blooms stands among soft lavender and blush wildflowers, looking up with wide gentle eyes. The entire scene is framed at the four corners by elegant trailing branches of soft blush pink garden roses and sage green leaves. Painted in an exquisitely luminous dreamy watercolor style with the softest blush pink, dusty lavender, powder blue, warm peach, champagne ivory, and pale gold — utterly magical, ethereal, and timelessly beautiful.

Custom-Made to Your Size

This mural is made to order. Provide your wall dimensions at checkout and we'll print it perfectly fitted to your wall.

• ✔ High-resolution, fade-resistant print
• ✔ Premium non-woven material
• ✔ Custom-fitted to your wall dimensions

Perfect for girls bedrooms, nurseries, and playrooms.

Ensure the wall is smooth, clean, and dry.
Remove any nails, screws, or dust. Sand down any rough surfaces.
Mixing Paste:

Follow the instructions on the paste package.
Mix the paste until it reaches a smooth consistency.
Installation:
Checking Panels:

Lay out all wallpaper panels on the floor.
Ensure the pattern matches and check for defects.
Applying Paste:

Use a roller or brush to apply a thin, even layer of paste directly onto the wall.
Start from the top and work your way down, covering a section slightly wider than the wallpaper panel.
Hanging Panels:

Begin from the left side of the wall and move right.
Align the first panel at the top and smooth it down from the center outwards to remove air bubbles.
Continue with the next panels, ensuring they align edge to edge without overlapping.
Trimming Excess:

Once all panels are hung, use a sharp knife to trim any excess wallpaper at the top, bottom, and sides.
Final Steps:
Drying Time:

Allow the wallpaper to dry for 24 hours.
Avoid touching or pressing on the wallpaper during this time.
Finishing Touches:

Inspect for any air bubbles or edges lifting and smooth them out if necessary.

1. Measure the Width and Height:
   
   Use a measuring tape to measure the full width and height of the wall. Measure at multiple points along the wall to account for any irregularities.
   Add an extra 5 cm (2 inches) to both the width and height measurements. This extra margin will allow for trimming and adjustments during installation
   
2. Sloped Walls:
   
   For walls with sloped ceilings or floors, measure the highest and widest points of the wall.
   It's important to capture the maximum dimensions to ensure the mural will cover the entire wall, even at its tallest and widest points.
   
3. Walls with Obstacles:
   
   Measure the entire wall as if there were no obstacles like doors, windows, or built-in furniture.
   You will cut around these obstacles during installation, so it's crucial to have enough mural material to work with.
   For windows and doors, measure to the edges and add the extra margin as previously mentioned.
   
4. Multiple Walls:
   
   When installing a mural on multiple adjoining walls, measure each wall separately.
   Combine the widths of all walls and add 5 cm for each wall to ensure enough material for proper alignment and trimming.
   
5. Irregular Shapes:
   
   For walls with irregular shapes, break down the wall into smaller, more manageable sections and measure each section separately.
   Combine the measurements, ensuring to add the extra margin for trimming.
   
6. Confirm Measurements:
   
   Double-check all measurements to ensure accuracy.
   Consider drawing a rough sketch of the wall with the measurements to help visualize the layout and to double-check the number